Karcepts Aeromotive A1000-6 Fuel Pressure Regulator
Mounting Bracket:
This bracket provides a means for mounting an Aeromotive A1000-6 FPR to your
K-Series engine (K20A/A2/A3/Z1) for a clean fuel line routing setup.
To install, locate the factory Honda K20A/A2/A3/Z1 air box mounting bracket.
Mount the Karcepts bracket to the air box mounting bracket with the provided
hardware.
Complete installation by mounting the Aeromotive A1000-6 FPR to the Karcepts
bracket, then connect your fuel lines.
...Or go with a completely custom setup, running your fuel lines straight to
the hard lines, with the use of an inline fuel filter.
However you may choose to route your fuel lines for that K-Series swap, the
Karcepts Aeromotive A1000-6 Fuel Pressure Regulator Mounting Bracket can
provide a clean means for doing so.
Karcepts, Inc. © 2008.
All Rights Reserved.
